Concrete pump truck hydraulic system daily inspection and maintenance how to do:
1. Daily check whether the hydraulic oil is pure in emulsification. It is generally caused by the infiltration of water into the hydraulic oil, which requires you to drain the pump tank regularly. (Approximately the pump truck does not work for 60 hours once drainage)
2. Check the oil level table of the pump truck to ensure that the hydraulic oil level can not be lower than the lower working level. If it is lower than the level, it needs to be added immediately.
3. Check whether the heat dissipation system of the pump truck works normally.
4, check whether there is oil leakage in the hydraulic pipeline.
5, mixing system and transfer box are prone to hydraulic oil leakage, generally mixing system hydraulic oil water, transfer box part, oil into the hydraulic system, so, once the stirring system is found to have oil leakage, please replace the seal in time.
Scan for consultation
Phone: +86+13730927018
Fax: +86+0532-89651313
Email address: coneleoffice@163.com
Address: No. 413, Tieqishan Road, Chengyang District, Qingdao
Sales Hotline:
+86+0532-87876387